Product

Automatic terminal inserting machine ST-1803 Stripping and terminal inserting machine: Main functions: two side terminals pressed, one side insert rubber shell; One side of the terminal is pressed into the rubber shell, and the other side is stained with tin; One side of the terminal is pressed against the rubber shell, and the other side is stuck with the tin strand
Control mode: Industrial computer +PLC/ single chip microcomputer
Pay-off system: tension pay-off system
Detection device: terminal or not, missing wire alarm, air pressure detection, terminal CCD detection, insert shell in place CCD detection, missing shell alarm

Details

ST1803 ENG.jpg

·Product parameters

Power supply	50/60HZ 220V single phase
Processing length	40mm~700mm (above 700mm needs to be customized)
Wire processing wire range	AWG#16-AWG30#
Terminal processing range	1.25/1.5/2.0/2.54/3.96 Universal for horizontal and straight molds
Capacity	L=100mm, 6500 points/hour
Peeling length	A side 0-5mm B side 0-10mm
Cutting accuracy	Cutting length is less than 100mm, error 0.5mm+ (set length X0.002)
air pressure	0.5-0.7Mpa (5-7KG/m3)
Dimensions	1600x1300x1400
weight	About 800KG

Standard.