An automatic cutting wire tin dipping machine is a specialized piece of equipment designed to automate the process of cutting wires to specific lengths and then dipping the ends in tin to create a conductive surface. This is commonly used in the manufacturing of electrical components and assemblies.
Functionality: Automatically cuts wires to predetermined lengths and applies a layer of tin to the ends to ensure good electrical conductivity.
Efficiency: Reduces manual labor and increases production speed and consistency.
Precision: Cuts wires to precise lengths using calibrated blades.
Tinning Process: Uses a tin bath or tin coating mechanism to apply a uniform layer of tin to the wire ends.
Control System: Incorporates a control panel or interface for setting parameters such as wire length, cutting frequency, and tinning duration.
Safety Features: Includes safety mechanisms to prevent accidents and ensure operator safety.
Automotive Industry: For preparing wires that will be used in automotive wiring harnesses, connectors, and other electrical components.
Consumer Electronics: For manufacturing electronic devices like computers, smartphones, and televisions, which require reliable wiring connections.
Medical Device Manufacturing:In the production of medical equipment where precision and cleanliness in wire preparation are critical.
Telecommunications: For preparing wires used in telecommunications equipment, including routers, switches, and network infrastructure.
Hong Kong Suntex Electronics is a comprehensive manufacturer in the wire harness industry, providing you with a one-stop solution to your wire harness manufacturing needs. From connectors to wire harness processing equipment, from household appliances to aerospace; we are committed to providing customers with various solutions and constantly pursuing innovation and high quality. Your inquiries are welcome!
model | ST-02HR |
Working power supply | AC220V/50/60HZ single phase |
Capacity | 3500-3800 pieces/hour (100-600mm) |
Processable wire | AWG#34-AWG#22 |
Cut off length | 15-9999mm |
Peeling length | 6mm at the front, 18mm at the rear |
Cutting accuracy | 0.2±0.01*L |
Twist length | 18mm |
Dip tin length | 18mm |
compressed air | 0.5-0.7MPA |
Detection device | Presence of wires, terminal detection, wire knotting, pressure sensor can be installed |
Dimensions | 1210*770*1370 |
weight | About 450kg |
ST-02HR fully automatic single-head tin dipping machine configuration and product specifications | |
1. Equipment functions: | |
Device name model | ST-02HR fully automatic single head tin dipping machine |
The main function | The A end is cut off, stripped, and riveted to the terminal; the B end is stripped, twisted, and tinned. |
control method | Human-machine interface + microcomputer adjustment |
Pay-off system | Computer fully automatic pre-feeding device, suitable for winding line + shaft loading line |
Detection device | Terminal presence or absence, wire knotting, wire missing alarm, air pressure detection |
Terminal pressure detection system | Can be optionally installed (applicable to both domestic and imported systems) |
Disposal of defective products | Sorting (the head can be equipped with a cutting device) |
Adapting mold | OTP standard transverse mold, straight mold, flag mold, European and Korean molds can be customized |
Terminal crimping ability | 2T/3T ultra-quiet frequency conversion terminal machine |
2. Technical parameters | |
Power supply | 50/60HZ 220V single phase |
Processing length | 13mm(full length)-99999mm |
Wire processing wire range | Precision AWG#20-AWG32# (2 rounds of wire feeding) |
Large wire type AWG#18-AWG14# (4-wheel wire feeding) | |
Terminal processing range | 0.8/1.0/1.25/1.5/2.0/2.54 Universal for horizontal and straight molds |
Capacity | 3000-3600 pieces/hour (100-600mm, tin dipped, no twisting) |
2200-2300 pieces/hour (100-600mm, tinned, twisted wire) | |
Peeling length | A side 0-10mm, B side 0-15mm |
Cutting accuracy | ±(0.2%*L+1)mm |
air pressure | 0.5-0.7Mpa (5-7KG/m3) |
Dimensions | 1210*770*1370mm Supporting pay-off frame size 920*560*1300mm |
weight | Approximately 400KG±15KG, supporting pay-off frame weighs approximately 80KG |
3. Equipment configuration | |
Motor | Mitsubishi/Huichuan |
Pneumatic Components | The cylinder, air pipe, and air pressure regulating valve are all supplied by the original Japanese SMC factory. The complete machine has 7 SMC cylinders and 9 original Japanese SMC solenoid valves; |
Waterproof bolt workstation | 1 set |
Slide rail | 4 sets of Taiwan Bank of China |
sensor | Panasonic |
belt | American Gates brand |
Bearing | Japanese NSK brand |
blade | It is made of imported alloy steel, processed by slow wire cutting, precision ground, and durable. |
Standard